Synergetic Wet Chain Lube Bottle 59ml / 2oz
Pay for your purchase in four interest-free installments (due every two weeks).
Detail Information
The Ultimate Oil Based Lube - SILCA's new oil-based lubricant created from technology originally developed in F1 racing, to reduce friction and nearly eliminate wear in all metal components.
Looking for impartial and trusted drive-train lube results? Check out the Zero Friction Cycling (ZFC) lubricant report here. Zero Friction Cycling uses the most robust testing - both in house controlled test and field testing as well as from the most accurate test labs around the world, to determine very select best in class products.
Following the huge success of SILCA Super Secret Chain Lube and Super Secret Chain Blend, it became clear to us that the vast majority of cyclists are still interested in using oil based wet lubricants for both ease of use and reduced time commitment to get started. While hot melt wax and drip wax may ultimately be slightly more efficient and cleaner running, the requirement of starting with a perfectly clean, dry chain, and the 300 mile re-application intervals are not for everybody.
The secret is a phenomenon known as a durable tribofilm, which is formed under pressure causing the WS2 and other additive to form a highly lubricious solid on the surface of the metal which acts not only as a lubricating surface, but also as a wear surface.
SPECIFICATIONS:
- 2oz / 59ml Squeeze bottle.
- Precision Applicator Tip.
- 12,000+ miles of lubricant per bottle.
- Ultra-high wearing, ultra-quiet, ultra waterproof wet lube.
INSTRUCTIONS:
Synergetic will work best on a perfectly clean/dry chain, but this is not absolutely necessary. It will eventually displace factory grease on all common chain brands if dripped over top on a new chain. Chain should be free of dirt and contaminants before applying Synergetic.
Initial application on clean/dry chain:
- Apply 1 drop of Synergetic to each set of gaps on each roller (2 drops per roller).
- Cycle chain backwards 10-12 revolutions to allow lubricant to fully penetrate.
- Wipe Outside of chain and chainrings as dry as possible using MicroFiber cloth.
- Re-apply 1 drop per roller every 600-800 miles or after every wet/rainy ride.
Application on chain with factory lube:
- Apply 1 drop per roller.
- Cycle chain backwards 10-12 revolutions white rubbing lubricant into chain between fingers.
- Wipe outside of chain and rings as dry as possible with MicroFiber cloth.
- Re-apply and wipe after each ride for 4-5 rides to allow Synergetic to replace factory lube.